26
Using the projector in standby mode
Some of the projector functions are available in standby mode (plugged in but not
turned on). To use these functions, be sure you have turned on the corresponding
menus under
Source
>
Standby Settings
, and the cable connections are correctly
made. For the connection methods, see the
"Installation" on page 11
chapter.
Active VGA out
Selecting
On
outputs a VGA signal when the
VGA IN
and
VGA OUT
sockets are
correctly connected to devices. The projector outputs the signal received only from
VGA IN
.
Active Audio out
Selecting
On
outputs an audio signal when the
AUDIO IN
socket is correctly
connected to a proper device.
LAN Control
Selecting
On
allows the projector to provide the network function when it is in standby
mode. See
"Using network features" on page 44
for details.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker.
Be sure you have made a correct connection to the projector audio input/output jacks.
See
"Installation" on page 11
for more details.
Adjusting the audio mode
1. Open the OSD menu and go to the
Settings 2
>
Audio Settings
>
Audio Mode
menu.
2. Press
/
to select a preferred audio mode.
• If available, you can press Audio Mode on the remote control to select a preferred audio
mode.
Muting the sound
1. Open the OSD menu and go to the
Settings 2
>
Audio Settings
>
Mute
menu.
2. Press
/
to select
On
.
• If available, you can press
on the remote control to toggle the projector audio between on
and off.
Adjusting the sound level
1. Open the OSD menu and go to the
Settings 2
>
Audio Settings
>
Audio Volume
menu.
2. Press
/
to select a desired sound level.
• If available, you can press
on the remote control to adjust the projector’s sound level.
Содержание DH765Z-UST series
Страница 1: ......
