DH6671 DLP Projector - User's Manual
44
3D Format
Select this option and press the Enter button to enable 3D replay and set 3D option.
Off
: Turn off the 3D Display Mode. When Auto, Side by Side, Top/Bottom or Frame
Sequential is selected, the 3D mode will be turned on. To turn off the 3D Mode, select
"Off" and press the Enter button.
Auto:
Enable the 3D format to automatically detect the formats of Side by Side, Top/
Bottom and Frame Sequential. This function may only be enabled for the input signal
below:
- The input signal is HDMI 1.4 3D.
- The HDMI 1.4 3D signal connects to the projector through HDBaseT transmitter.
Side by Side
: Manually switch the 3D Format to Side by Side. This option is only
applicable to the HDMI input signal or the HDMI signal sent using HDBaseT transmitter.
Top/Bottom
: Manually switch the 3D Format to Top/Bottom. This option is only
applicable to the HDMI input signal or the aforementioned signal sent through the
HDBaseT transmitter.
Frame Sequential
: Set the format to Frame Sequential.
DLP Link
: Set to activate or deactivate the DLP Link sync. signal.
3D Swap
: If the 3D imaged viewed through the 3D glasses for the left and right eyes are
inverse, set the 3D Swap to "Inverse". If the images are normal, keep the current.
3D 24Hz Display
: Set the 3D 24Hz image frame rate to 144fps or 96fps, this option is only
applicable when the input signal is 24Hz
Note:
•
The projector provides DLP Link and 3D IR sync. After the 3D Mode is enabled, the built-in DLP Link or
external 3D IR transmitter can be used to synchronize the signal of the 3D glasses. Or, you may turn off
the DLP Link sync signal and only select the external 3D IR transmitter to synchronize the 3D signal.
Caution:
The people listed below shall be aware when watching 3D images:
•
Children under six years in age.
•
People who are allergic to light, unhealthy and have the history of cardiovascular.
•
People who are tired or lack of sleep.
•
People who are under the impact of drug or alcohol.
•
Normally, it's safe to watch 3D images. However, some people might feel uncomfortable.
•
Refer to the guidelines revised and released by the 3D League on December 10, 2008.
•
People need to take a break for at least 5 to 15 minutes every thirty minutes or one hour.
Filter Message
This function allows you to set interval time to display a message for cleaning the filter; the
available options are Off, 100H, 200H, 500H and 1000H. Please make sure to reset the
filter Message after cleaning the filter.
