Vivitek D5010-WNL, Руководство пользователя

Страница: 42 / 66

DLP Projector—User’s Manual
SETUP>>Advanced Menu
Press the
MENU
button to open the
OSD
menu. Press the cursor ◄► button to move to the
SETUP>>Advanced
menu. Press the cursor ▲▼ button to move up and down in the
SETUP>>Advanced
menu.
I
TEM
D
ESCRIPTION
Audio Press the
ENTER
button to enter the
Audio
sub menu. See Audio on page 35.
Lamp Press the
ENTER
button to enter the
Lamp
sub menu. See
Lamp
on page 35.
HDMI Press the
ENTER
button to enter the
HDMI
sub menu. See
HDMI
on page 36.
High Altitude Mode
Press the cursor ◄► buttons to turn on or off High Altitude Mode.
Recommended to turn on when the altitude of the environment is higher than 1500m (4921ft).
Test Pattern Press the cursor ◄► buttons to select test pattern.
Closed Caption
Press the
ENTER
button to enter the
Closed Caption
sub menu.
See
Closed Caption
on page 36.
LED Control
Press the cursor ◄► buttons to select the LED control.
Select
Normal
for normal LED display and Off to disable LED display.
Presentation Timer Press (Enter) / ► to the Presentation Timer menu. See
Presentation Timer
on page 37.
Low Power Mode
Press the cursor ◄► buttons to set Low Power Mode on or off.
Note:
When Low Power Mode set to off, VGA OUT terminal can output signal during projec-
tor in Standby mode.
Low Power mode will be gray out, when command control is setting to RJ45.
Reset All Press the
ENTER
button to enter reset all settings to default values.
—
34
—