User’s Manual >>
EN-5
Notes on Battery Usage
When you use the battery, carefully read and strictly observe the
Safety
Instructions
and the notes described below:
Use only the specified battery (1050mAh, 3.7V).
Avoid using battery in extremely cold environments as low temperatures
can shorten the battery life and reduce ViviCam 8300s performance.
When you are using the new rechargeable battery or rechargeable
battery that has not been used for an extended period of time (the
battery that passed the expiry date is an exception) might affect the
number of images that can be captured. Therefore, to maximize its
performance and lifetime, we recommend that you fully charge the battery
and discharge it for at least one complete cycle before use.
The battery may feel warm after long period of continuous use of the
ViviCam 8300s or the flash. This is normal and not a malfunction.
The ViviCam 8300s may feel warm after long period of continuous use.
This is normal and not a malfunction.
If the battery is not to be used for a long period of time, remove it from
the ViviCam 8300s to prevent leakage or corrosion.
If the battery is not to be used for a long period of time, store it after no
battery power left. If the battery is stored for a long time in a fully charged
state, its performance may be impaired.
Always keep the battery terminals in a clean state.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
WARNING: Handling the USB cable on this product may expose you to lead,a
chemical known to the State of California to cause birth defects or otherreproductive
harm. Wash hands after handling.
