Vivitar ViviCam 7330, Руководство пользователя

Страница: 22 / 47

PLAYBACK MODE - THE BASICS
Viewing Images
You can display the still images one by one.
1. Rotate the mode dial to A , P ,
It, A,
, *)
or 82 and turn ViviCam 7330 on
by pressing the power switch.
2. Press the p button.
• The last recorded image appears on
the LCD monitor screen.
• Basic information is shown by
indicators on the LCD monitor screen.
To see full information display, press
the OK button.
3. Use the four-way controller (1
►
) to select the desired images.
• To view the previous image, press the four-way controller (4).
• To view the next image, press the four-way controiler (
►
).
■
For protected images/movie clips, Qn
mark will be displayed. Refer to the section in this
manual titled "Protecting Images/Movie Clips" for further details.
■
If there is no image stored in the internal memory or on the SD memory card, [No image]
message will appear on the LCD monitor screen.
■
You cannot enter the Playback mode from the Setup mode.
EN-25