Vivitar Vivicam 3710, Руководство пользователя

Страница: 7 / 34

6
Section 2
Getting Up and Running
Loading the Batteries
You must insert 2 AA size alkaline batteries
before the camera can be used:
1. Press down and hold the release button,
and slide the battery/SD Card cover in the
direction of the arrow to release the cover.
2. Insert the batteries according to the correct
polarity marks (+ or -).
3.
Close the battery/SD card cover firmly.
-
SD Card
+
Battery/SD
Card Cover
AA Size Battery
Release Button
-
SD Card
+
Battery/SD
Card Cover
AA Size Battery
Release Button
Inserting and Removing an SD Card (Optional)
The camera comes with built-in memory, allowing you to store im ages and movie clips. You
can expand the memory capacity by using an optional SD (Secure Digital) memory card. To
insert a memory card, refer to the figure above and:
1. Open the battery/SD card cover.
2. Insert the memory card with the metal surface facing the front of the camera.
3. Press the card into the slot until it locks into position.
To remove an installed SD card, press the card inwards to release it. When the card pops out,
gently slide it from its slot.
Release
button