5
POWERING THE CAMCORDER ON
1)
Installing the Batteries
Make sure to properly install the 4xAA (1.5) batteries. Batteries not included.
Rechargeable batteries are not recommended.
Battery Power:
Some features, will not work if the battery power level is low.
When the battery power is low the battery icon turns red and the camcorder will
automatically turn off a few seconds later.
The energy status of the power is displayed on LCD as shown below:
Full battery power (white battery icon)
Medium battery power (yellow battery icon)
Low battery power (red battery icon)
2)
Installing the SD Memory Card
IMPORTANT: You must use only a Class 4 SD Memory card or higher.
Make sure a Class 4 (or higher) SD Memory card (up to 32GB) has been properly inserted
into your camcorder. SD Memory card not included. To properly insert the SD Memory Card:
Push the SD Memory card into the slot in the direction as shown on the SD card icon on
the camcorder.
Push the SD Memory card until you hear a slight clicking sound. This indicates the SD
Memory card has been inserted correctly.
After the camcorder is powered on, an SD icon will appear on the LCD display. If you do
not see the SD icon on the display, please check if the card was inserted properly.
3)
Powering On
Press the
POWER
button to turn on the camcorder.
