8
4)
Using the Camera
Powering ON/OFF Your Digital Video Camera
Make sure the battery has been inserted and charged properly.
Make sure an SD card (Class 2 or Class 4) has been inserted into your camera.
(SD card up to 16GB - SD Card not included)
Powering the DVR ON
Press and hold the
Power
button
to turn your camera ON.
The camera will be in Video Capture mode to start.
Powering the DVR OFF
While the camcorder is on, you can press and hold the
Power
button
again at any point to turn
your camera OFF. You will see a “Goodbye” splash screen and then the camcorder will power off
completely.
Note:
Your digital video camera also has an Auto Power Off feature that will automatically turn off
your camera after 1 minute that your camera is left idle.
When the battery level is low, the camera will turn off automatically. This indicates that you must
recharge the battery.
