Page
13
of
15
This secction covers a number of faults, their possible causes, and what can be done to remedy
the fault.
Fault
Poss.
Cause
Remedy
Comment
Loss of
signal
No
Power
Make sure that power is ON.
Make sure that power supply fuses
are good.
Make sure the line-of-sight for the
radio is un-obstructed.
Powered by PoE, check that the
Modem/Router has power.
Powered by 48 VDC, check that the
PSU works.
Loss of
data
No
signal
Make sure that the connections are
correctly inserted.
Check with network provider if
there is any problem with the
network.
Double-check all equipment
connections.
Check if there is a problem with the
data signal from the Modem or
Router
Access
Denied
No data
Check with your network provider
if there are any network
disturbances.
Restart the node.
Caution:
The Pandora360 may be powered by more than one power source to ensure
uninterrupted service. To de-energize a Pandora360, disconnect all power sources.
7. Standards
We
Vivint, Inc. 4931 N. 300 W. Provo, UT 84604 USA
declare under our sole responsibility that the product Pandora360 (M/N: CE04) complies
to the following standards:
Radio Spectrum: FCC Part 15 – §15.255 & §15.247 and IEEE 802.11b/g/n/ad
EMC: FCC Part 15 - §15.207 & §15.209, IEC/EN 61000-4-2, 61000-4-3, 61000-4-4,
61000-4-5 and 61000-4-6.
Safety: UL/IEC/EN 62368-1, UL/IEC/EN 60950-22, UL 50E and IEC/EN 60529
Safety Human Exposure: Part 15 - 15.247(i), § 15.255(g), Part 1 - § 1.1310 and FCC
OET BULLETIN 65
