Vivint Element CT200, Руководство по установке, Страница: 42 / 46

Customization
6
Vivint Element CT200 Operation Guide
5 . Highlight Link, then press the SIDE button . The unit attempts to
connect to a local Z-Wave Network .
RESET
The Network>Reset resets the
Thermostat's radio to unlink it
from its linked Z-Wave Controller .
Use this option before replacing
your Z-Wave Controller so that
your Thermostat can connect to
the new controller .
1 . From the Home screen, press
and hold the SIDE button for
three (3) seconds .
2 . Press DOWN to highlight
Installer, then press the SIDE
button .
3 . Press DOWN to highlight Network, then press the SIDE button .
4 . Press DOWN to highlight Reset, then press the SIDE button .
5. To confirm that you want to reset the connection, press DOWN to
highlight Reset, then press the SIDE button .The connection resets .
Testing
Testing options enable you to test the functionality of your heating
and cooling equipment’s connection to the Thermostat . For
instructions on running these tests, see page 20 in the Installation
Guide .
Installer: Network/Reset Cont .
Reset
RESET
Are you sure?
42