vividtouch VTF-6510 Скачать руководство пользователя страница 5

Страница: 5 / 77



If metal or liquid gets into the display, it may cause a fire or an electrical shock.



Don’t install or remove the power plug with wet hands.



This may cause an electrical shock.



If the display will not be used for a long period of time, unplug the display.



This may cause premature wear of electrical components or fire.



Don’t press on the LCD panel.



This may cause personal injury or panel damage.



Don't push or shake the display.



This may cause damage or injury.



If the glass of the display panel is broken, liquid may escape. Please don't touch the liquid.



If liquid get into your eyes or touches your skin, wash with the clean water and seek medical attention

immediately.



Precautions with the remote control batteries



Please only use approved AAA type batteries.



Please be sure to insert batteries by matching the + and -.



Don’t recharge, heat, disassemble, short or throw batteries into a fire.



Don’t mix a new battery with a used one.



Don’t mix different types of batteries together (only use the specified type). it may cause burn and
injury.

Cleaning



If dust has collected on the power plug, removed the plug from the outlet and clean off the dust.



Dust build-up may cause a fire.



Take off the power plug before cleaning.



Failure to do so may result in electrical shock or damage.



Cleaning the surface of the display



When the surface of the display becomes dirty, please wipe the surface lightly with a soft clean cloth.



If the surface requires additional cleaning, lightly moisten the cloth.



Do not to let any kind of liquid enter the display as it may cause electrical shock or damage.



Do not clean the display with alcohol, solvents or ammonia, as this could damage the display.

Содержание VTF-6510














































































Результаты поиска

Содержание VTF-6510

Отзывы:

Похожие инструкции для VTF-6510

Бренды по названию

Популярные бренды

vividtouch VTF-6510, Руководство по установке и эксплуатации

Результаты поиска

Содержание VTF-6510

Отзывы:

Похожие инструкции для VTF-6510

Бренды по названию

Популярные бренды