Vivid CLT-302L, Руководство пользователя

Страница: 54 / 59

51
2.2. Rear Panel
The CLT-302 Camera Link Translator rear panel is shown in Figure 2-3. The rear panel
contains a 26-pin MDR video connectors for connecting to the frame grabber, an 8-
position mode select DIP switch, and a DC power jack. The MDR-26 connector is a 3M
device as specified in the Camera Link Spec. Figure 2-4 identifies the MDR-26 pin
positions
The DC power jack accepts either a standard 2.1 x 5.5 mm barrel-style power plug, or a
special locking version plug. The locking plug has bayonet-style “ears” on the barrel.
Once inserted, the barrel may be turned ¼ turn clockwise. This locks the connector in
place and provides retention. The locking plug is removed by first turning the barrel ¼
turn counterclockwise, and then pulling out the plug from the unit. Plug polarity is center-
positive. The locking power plug is Philmore p/n 2150.
FRAME GRABBER 4.5 - 6.0 VDC MODE
Figure 2-3: CLT-302 Rear Panel
pin 1 pin 13
pin 14 pin 26
Figure 2-4: MDR-26 Connector Pin Positions