Vivid CLT-302L, Руководство пользователя

Страница: 17 / 59

14
2.1.1. Camera Connector Signals
Tables 2-1 through 2-5 identify the 100-pin camera connector signal assignments for
single-channel pixel data modes (1x8, 1x10, 1x12, 1x14, and 1x16). Tables 2-6
through 2-8 identify the signal assignment for dual-channel modes (2x8, 2x10, 2x12),
and Table 2-9 identifies the signal assignment for color mode (3x8).
The
appropriate table must be used when making a camera cable for use with the
CLT-302.
2.1.2. Camera Cable Shielding and Grounding
At a minimum, one digital ground pin at the camera connector must be connected to
one of the digital ground pins on the CLT-302 connector in order to maintaining
signal reference levels between camera and CLT-302. Camera cable “inner” shields
(if present) should connect to CLT-302 digital ground pins.
Camera cable “outer” shields should attach to the metallic connector shell, which
contacts the CLT-302 aluminum enclosure. CLT-302 enclosure body and endplate
contacting surfaces are unpainted, providing a Faraday cage to shield the internal
circuitry. The enclosure is isolated from the CLT-302 circuitry, avoiding possible
safety concerns.
2.1.3. Camera Cable Recommended Connectors
The camera connector used in the CLT-302 is made by TE Connectivity
(
www.te.com , formerly Tyco and originally Amp). The connector part number is
identified in Section 2.1. The following is a list of recommended mating connectors
and hardware for use in camera cables:
Plug, TE Connectivity p/n 1-5750913-9
Plug, TE Connectivity p/n 5749111-8
Plug, TE Connectivity p/n 5749621-9
Backshell, TE Connectivity p/n 5749854-1
Backshell, TE Connectivity p/n 5749081-1