Vivax VS-1102, Руководство пользователя

Страница: 68 / 88

ENG
VIVAX
6
TROUBLE SHOOTING
Nothing happens when I try to vacuum package:
1. Check the power cord to see if it is firmly plugged into electrical
outlet.
2. Examine power cord for any damage.
3. Check electrical outlet is working by plugging in another position.
4. Make sure the lid is closed and the latch is in the locked position.
5. Make sure bag is placed correctly inside vacuum channel.
6. Wait 20 seconds to allow appliance to cool off , and then try using it
again.
Note : The appliance will shut off automatically if it becomes too hot.
AIR IS STILL IN THE BAG:
1. Make sure the open end of bag is resting entirely inside vacuum
channel. If the edge of the bag is beyond vacuum channel, bag will
not seal properly.
2. Examine bag for leaks. To see if your bag has a leak,seal bag with
air, submerge it into water and apply pressure.Bubbles indicate a
leak, use a new bag if bubbles appear.
3. If you are using a custom-sized Vivax bag,check seal of bag. A
wrinkle in the bag along the seal may cause leakage and allow air
to re-enter,just cut bag and reseal.
4. Do not attempt to make your own side seams for a Vivax bag,the
bags are manufactured with special side seams,which are sealed
all the way to the outer edge.Making your own side seams may
cause leakage and allow air to re -enter.
AIR WAS REMOVED FROM THE BAG, BUT NOW AIR HAS
RE-ENTERED.
1. Examine seal of bag. A wrinkle along the seal may cause leakage
and allow air to enter,simply cut bag and reseal.