Vivax TV-32LE80T2S2, Инструкция по эксплуатации

Страница: 64 / 104

ENG
VIVAX
17
-
Do not repeatedly insert or remove the Common Access Module as this may
damage the interface and cause a malfunction.
-
You must obtain a CI+ module and card from the service provider of the
channels you want to watch.
-
Insert the CI+ module with the SmartCard in the direction marked on the
module and SmartCard.
-
CI+ is not supported in some countries and regions; check with your
authorized dealer.
►
USB
Connect the USB devices such as hard drives, USB sticks and digital cameras
for browsing photos, listening music and watching recorded movies. At the same
time update is also an easy thing and will be done just by plugging the USB with
the updating files into the same interface
NOTES
When connecting a hard disk or a USB hub, always connect the mains adapter of the
connected device to the power supply. Exceeding a total current consumption may result
in damage. The maximum current consumption is 500mA.
For individual non-standard high-capacity mobile hard disk, if it's impulse current is greater
than or equal 500mA, it may cause TV-rebooting or self-locking. So the TV does not support
it.
The USB port supports a voltage of 5V.
The maximum supported storage space of the hard disk is 1T.
If you want to play the video streaming of a DTV program, the transfer rate of the USB
storage device must not be less than 5MB/s.
► HEADPHONE
Connect Headphone for audio out of the TV.
Headpones (not include into
accessories)