Page 17
Gruber Antrieb GmbH & Co KG | brixentAlerstr. 51 | 6300 WörGl | t: +43 5332 70317
The vivax assist is maintenance-free. However, a thorough inspection
before each cycling tour is absolutely necessary for your safety!
5. service anD mainTenance
5.1
Inspection
Plug connections in saddlebag are fix: battery (bayonet fixing), push-button
(6 pole. plug), plug of the speed limiter (3 pole. plug - only with blocking at
25 km/h)
Check cables and plugs. Damaged cables and connections must be
replaced immediately. Please contact your specialist dealer.
Inspect the saddlebag fastening for damages and mechanical security.
Check the saddlebag for tears and damage.
Control the battery charge.
Perform a function test.
After an accident, both the bicycle and the vivax assist should be inspected
by an authorized dealer.
5.2
Maintenance
Never unfasten the motor mounting screw (16) on the seat tube!
Never disconnect the cables and plugs (except battery).
service and maintenance
5.3
Cleaning
Always remove the battery and close the saddlebag before cleaning, to
ensure the plugs are protected.
Only clean your bicycle with clear water and a sponge!
Never use a high-pressure cleaner or water jets. The electrical equipment
and electronics of the drive are not designed to cope with this!
Do not turn the bicycle upside down when you clean it.
