ENG
VIVAX
15
Prior to replacement of the lamps, remove power cable of the hood. And then lift the front
glass upward and remove the aluminum cartridge filter. Afterwards:
TROUBLESHOOTING
The following simple issues can be handled by the user. Please call the after-sale
service department if the issues are not settled!
Problem
Possible cause
Solution
Light on, but fan
does not work
The fan blade is jammed
Switch of the unit and repair by
The motor is damaged. qualified
service personnel only
The motor is damaged
Both light and fan do not
work
The light bulb burned
Replace the bulb with correct
rating
Power cord looses
Plug in to the power supply
again.
Serious
Vibration of the
unit
The fan blade is damaged.
Switch of the unit and repair by
qualified service personnel only.
The fan motor is not fixed tightly.
Switch of the unit and repair by
qualified service personnel only
The unit is not hung properly on
the bracket
Take down the unit and check
whether the bracket is in proper
location.
Suction performance
not good
Too long distance between the
unit and the cooking plane
Readjust the distance to 65-
75cm
1. Disconnect the female and male
connectors of the lamps by pushing
back part of the plastic lug as
shown in the figure at left here to
release the locking mechanism
(Figure 14).
2. Hold the lamp at its body and rotate
2 retaining lugs on the lamp
clockwise or anticlockwise to match
with the gaps on the lighting panel.
After bringing the retaining lugs to
align with the gaps, hold the lamp
at its body and bring it out (Figure
15)
(Figure 14)
(Figure 15)
Содержание CHO-60CHA100T X
