Vivax CF- 310 NFX, Инструкция по эксплуатации

Страница: 95 / 120

VIVAX
ENG
16
“Fast Cool” function
" Fast cool " function turn-on rapid cool in duration of 150 minutes. After that, the
refrigerator will continue to work on the original set temperature.
Operate : Press “Fast Cool” button. The Indicator of rapid cooling lights up, and the
refrigerator operates at 2
º
C.
Stop : 1. Automatically after 150mins operate under the rapid cooling mode.
2. Press Temperature adjustment buttons to exit from the rapid cooling
mode.
◆ During high ambient temperatures e. g. on hot summer days. It may be
necessary to set the thermostat to the Coolest setting (position 3
º
C or 2
º
C). This
may cause the compressor running more often in order to maintain a low
temperature in the cabinet.
◆
For the first time you install your refrigerator, set the thermostat knob at 4
º
C or
6
º
C.
Give your refrigerator time to cool down completely before adding food. It is the
best to wait 24 hours before adding food. The thermostat knob controls the
temperature.
IMPORTANT: When you set the higher temperature in the refrigerator, in
that case the compressor will not switch-on often or it will be turned off
some period of time, but this does not mean that the refrigerator is
disconnected from the power supply. For cleaning and maintenance, be
sure to disconnect the power supply device by pulling the plug out of the
socket!
Noise Inside the Unit!
You may notice that your unit makes some unusual noises. Most of these are perfectly normal,
but you should be aware of them!
These noises are caused by the circulation of the refrigerant liquid in the cooling system. It
has become more pronounced since the introduction of CFC free gases. This is not a fault
and will not affect the performance of your unit. This is the compressor motor working, as it
pumps the refrigerant around the system.
Change the Light Bulb
The LED lamp must be replaced by authorized service. Please contact authorized service or
manufacturer.