Vivax CF-180 WH, Инструкция по эксплуатации

Страница: 95 / 124

VIVAX
ENG
14

In case that your device has freezing compartment with 4 stars, this refrigerating
appliance is suitable for freezing foodstufs
In case that your device has freezing compartment with 1, 2 or 3 stars, this refrigerating
appliance
is NOT suitable for freezing foodstufs .

Two-star * frozen-food compartments are suitable for storing pre-frozen food ,
storing or making icecream and making ice cubes .

One-, two- and three-star * compartments are not suitable for the freezing of fresh
food .

If the refrigerating appliance is left empty for long periods, switch off, defrost, clean,
dry, and leave the door open to prevent mould developing within the appliance
The first Start
Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda.
Then rinse with warm water using a 'Wrung-out' sponge or cloth.
Wash the shelves and salad bin in warm soapy water and dry
completely before replacing in the unit.
Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
◆ Before Plugging in
You must check that you have a socket which is
compatible with the plug supplied with the unit.
◆ Before Turning On!
Do not turn on until one hour after moving the unit.
The refrigerator shall run 2 to 3 hours before loading fresh or frozen foods; the refrigerator
shall run for more than 4 hours in summer in advance considering that the ambient
temperature is high.
Operation
Switching On Your Unit
◆ The temperature selector knob is located inside of the refrigerator compartment.
When the Thermostat knob is turned up to the end position, below the "Min"
position (1), the Refrigerator will stop cooling.
Setting “MIN” (1-2):
Less Cool Temperature
Setting “MED” (3-4): Normal Operation (adequate for most situations)
Setting “MAX” (5-6): Coolest Temperature
◆
During high ambient temperatures e. g. on hot summer days. It may be necessary to set
the thermostat to the Coolest setting (position “
MAX ” (5-6) , Turn knob to clockwise
direction). This may cause the compressor running continuously in order to maintain a
low temperature in the cabinet.
◆
For the first time you install your refrigerator, set the thermostat knob at “ MED ” (3-4)
(middle position).