Vivax ACP-18COFM50AEEI, Руководство пользователя

Страница: 27 / 110

Tools needed forinstallation:
LeveL gauge Screwdriver
Electric drill, Hole core drill
(
Φ
65mm)
Flaring tool set
Specified torque wrenches: 1.8kgf.m, 4.2kgf.m,
5.5kgf.m, 6.6kgf.m (different depending on model No.)
Spanner (half union)
Hexagonal wrench (4mm)
Gas-leak detector
Vacuum pump
Gauge manifold
Users manual
Thermometer
Multimeter
Pipe cutter
Measuring tape
Accessories
Number Name of Accessories Q
’ ty/one unit
1
Installation Plate 1
2
Plastic Expansion Sheath 5-8
(depending on models)
3
Self-tapping Screw AST3.9X25 5-8
(depending on models)
4
Connecting
pipe
Assembly
Liquid side
Φ
6.35
Φ
9.52
Parts you must purchase
Consult the technician
For the proper size.
Gas side
Φ
9.52
Φ
12.7
Φ
15.9
5
Remote controller 1
6 Self-tapping Screw B ST2.9X10 Optional parts 2
7
Remote controller holder 1
8
Seal (for cooling & heating models only)
1
9
Drain Joint (for cooling& heating models only) 1
10
Transfer connector (Packed with the indoor unit)
(NOTE: Pipe size differ from appliance to appliance. To meet
different pipe size requirement, sometimes the pipe
connections need the transfer connector to install on the
outdoor unit.)
3-4
(on some models)
11
Magnetic ring
(Hitch it on the connective cable between indoor unit and
outdoor unit after installation.)
Optional part
(one piece/one cable)
12
Cord protection rubber ring
(If the cord clamp can not fasten the cord for the small size of
the cord, please use the cord protection rubber ring (supplied
with accessories) to wrap on the cord, then fix it with the cord
clamp.)
1
(on some models)
Note: Except the above parts provided, the other parts needed during installation you must purchase.
4