Vivax 50UHD123T2S2SM, Инструкции по эксплуатации

Страница: 164 / 216

ENG
VIVAX
17
► USB
Connect the USB devices such as hard drives, USB sticks and digital cameras
for browsing photos, listening music and watching recorded movies. At the same
time update is also an easy thing and will be done just by plugging the USB with
the updating files into the same interface
NOTES
When connecting a hard disk or a USB hub, always connect the mains adapter of the
connected device to the power supply. Exceeding a total current consumption may result
in damage. The maximum current consumption is 500mA (USB 3.0 socket: 1000mA).
For individual non-standard high-capacity mobile hard disk, if it's impulse current is greater
than or equal 500mA, it may cause TV-rebooting or self-locking. So the TV does not support
it.
The USB port supports a voltage of 5V.
The maximum supported storage space of the hard disk is 1T.
If you want to play the video streaming of a DTV program, the transfer rate of the USB
storage device must not be less than 5MB/s.
► CI: COMMON INTERFACE
Insert the CI or CI+ module for watching scrambled services like pay-tv channels
or some HD channels
NOTES
- Before you insert/remove the CI module, ensure that the TV is switched off. Then
insert the CI card into the CI module in accordance with the Service Provider's
instructions.
- Do not repeatedly insert or remove the Common Access Module as this may
damage the interface and cause a malfunction.
- You must obtain a CI module and card from the service provider of the channels
you want to watch.
- Insert the CI module with the SmartCard in the direction marked on the module
and SmartCard.
- CI is not supported in some countries and regions; check with your authorized
dealer.