Vivax 32LE79T2S2, Инструкции по эксплуатации

Страница: 234 / 276

ENG
VIVAX
23
set and the other ends to corresponding audio and Video out connectors on
the A/V device.
• Connecting Digital Audio
Connect an Coax RCA audio device to this jack.
USING THE REMOTE CONTROL
• Turning your TV on and off
Turning off to standby mode: Press [ ( | ) Power Standby] on the back RHS
panel or on the remote control to switch to standby mode. You can activate
the unit again by pressing [ ( I ) Power Standby].
Power indicator: Light indicates standby mode. There will be no light when
the power switch is in the off position.
► NOTE
Remove the connection from the wall power outlet if you do not intend to use the
unit for long periods, for example if you plan to be away a few days. Wait at least
5 seconds after turning off if you want to re-start the TV.
• Selecting the Input Source
Select the Input Source depending on the video device you have connected
to your TV.
To select the Input Source: Press [Source] button. When the list of Input
Source appears, press [▲/▼] to select the source, then Press [
ENTER ] to
connect.
• Adjusting the volume
Press [ VOL▲/VOL▼ ] to increase or decrease the volume.
Press [ MUTE ] to turn the sound off. Press [ MUTE ] again to turn the sound
back on.
• Changing channels
Press the [ CH ▲/CH ▼] buttons to go to the next higher or lower channel. Or,
Press the number buttons to select a channel. For example, to select channel
12, press [1], then press [2].
• Selecting the sound mode
Press the [ Sound Mode ] button to select between 5 different pre-adjusted
sound modes: Standard, Music,Movie,Sports and Personal.
• Selecting the picture mode
Press the [ Picture Mode ] button to select between 6 different pre-adjusted
picture modes: Standard, Cinema Day,Cinema Night, PC Game, Dynamic
and Personal.
• Selecting the aspect ratio
Press the [ ASPECT ] button to change the screen aspect ratio among Normal,
4:3, Wide, Zoom and Cinema