Page 33 of 44
™
4 Loc3 Series Transmitters
4.1.2 Pushbuttons
1
3
4
5
2
1.
On/Off button
2.
Frequency selector
3.
Information (Volume, Volts, Ohms, Multi-frequencies LCD
Contrast, Receiver Link, Frequency menu and About
screen)
4.
Output decrease/Navigate through the menu
5.
Output increase/Navigate through the menu
4.1.3 Transmitter Information Pushbutton
Press the “
i
" button to access the transmitter settings and menu.
Use the “+” and “–” buttons to navigate the settings and menus.
Use the “
f
” button to make selections. An X will appear for selected items.
5 and 10-Watt Transmitter Menu Structure
Volume
Voltage
Resistance
Multi Frequency
LCD Contrast
Receiver Link Disabled
Frequency Menu
About
When the “
i
” pushbutton is pressed the display will show the volume level. Use the + and - pushbuttons to increase, reduce or
turn the speaker off. (off-low-medium-high).
Keep pressing the “
i
” pushbutton, and the display can be toggled to show “voltage,” “resistance,” or other functions as shown in
the illustration above. The display indicates mA as the default and volts or ohms when selected.
NOTE
The number of “i” button presses and available sub-menus will vary with the transmitter's mode.
4.1.4 Connections Block
1
2
3
4
FUSE
1.
Output connection, 3-pin XLR
2.
Fuse holder - Output protection (1.6A/250V Fuse)
3.
Speaker
4.
Battery charging & DC input socket
All connections to the transmitter are made through the connection block.
