manualshive.com logo in svg

Vivax Metrotech vLoc3-5000, Руководство пользователя

Поделиться
Скачать
Vivax Metrotech vLoc3-5000 Скачать руководство пользователя страница 57

Page 51 of 62

™

5     Loc3-10SiSTx Transmitter

5.5  Transmitter Link (TX-Link)  

Currently the Tx-Link feature is 

only available in the 5-watt and 10-watt transmitters

.

The Loc3 series transmitters can be remotely operated from the receiver. This option requires the Transmitter (radio) Link to be 
installed in both the vLoc3 series receiver and the Loc3 series transmitter. 

Tx-Link is a factory fit option that must be purchased at the time of ordering. The radio link range depends on having a clear “line 
of sight” between Rx and Tx but is typically around 300m 

(984ft)

.

The Tx-Link feature is shown as RECEIVER LINK in the menu.

Linking a transmitter to a receiver:

1.  Press the “

i

 ” button repeatedly to scroll through the options until the 

“RECEIVER LINK DISABLED” option is displayed.

R E C E I V E R   L I N K

D I S A B L E

2.  Press the “+” key to enter the Receiver Link menu.

Press the “+” or “-” key to highlight the “ENABLE” option, then press the “F” 
key to start the process. The display will show the message “WAIT” until the 
setup is complete.

R E C E I V E R   L I N K

E N A B L E
B A C K

3.  An ID number-will now be displayed at the bottom of the screen for 

identification purposes.

R E C E I V E R   L I N K

D I S A B L E
B A C K

8 8 = 6 b = O f = 8 4 = 5 b = b 4

4.  The transmitter is now waiting to connect to a receiver.

Either press the “I” button or use the “+” and “-“ keys to highlight “BACK” then 
the “F” key to exit back to the main screen.

When on the main screen, a “beacon” icon will be displayed on the right-
hand side. When the icon is flashing, the transmitter is waiting to connect to a 
receiver. The flashing will stop when successfully connected to the receiver. 
If no icon is visible, this indicates that the Receiver Radio Link has not been 
activated.

83.1

 

kHz

L 2

Содержание vLoc3-5000









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды