Vivax Metrotech i5000, Руководство по эксплуатации

Страница: 32 / 45

i5000 Receiver - Operations Manual 32 / 45
©Metrotech Corporation 2006 – All Rights reserved
6.1.3.2 Audio
The Audio menu controls the i5000 receiver audio output characteristics.
Use the 4-way navigation button to move up and down the settings list. Use the 4-way navigation
button to move right and highlight the audio options. Press the <Select> soft key to toggle
through the different speaker volume settings – from OFF to High.
After selecting the desired speaker volume, use the 4-way navigation button to highlight the
Sound option. Use the <Select> button to toggle through the available choices - LR, AM and
None. The Sound options are:

LR (Left/Right audio guidance)

AM (Amplitude modulated audio mode mapped to Peak signal strength)

None (Deactivates speaker output related to Left/Right audio guidance or Peak
signal strength but keeps Key-Sound active)
Use the 4-way navigation button to highlight the
Key-Sound option. Highlighting the Key-Sound
option switches the key sound ON or OFF. In the ON mode, the speaker emits a short beep any
time a key is pressed even when the speaker volume setting is OFF.
Press the <Select> button between ON and OFF. Press <Back> to return to the previous menu.
Figure 6-13 Audio Selection in Settings Menu
6.1.3.3 Initial Setup
The Initial Setup section of the Settings menu controls the following receiver features:

Backlight

Units

Auto-Off

Last Frequency

Language
Use the 4-way navigation button to move up and down the settings list. Use the 4-way navigation
button to move right and highlight the
Initial Setup option. Use the 4-way navigation button to
move right and highlight the setup options.
The
Backlight has three selectable options – 60 seconds ON prior to turning OFF, always ON, or
always OFF. If the 60s option is selected, any key-push returns the backlight on for 60s should it
have been timed out. Press the <Select> soft key to toggle through the different backlight
options.
The
Units menu item controls the depth readout format of the receiver. Two options are
available – US and Metric. The US setting displays depth in feet and inches. The Metric setting
provides depth readout in cm. Press the <Select> soft key to toggle between the options.