i5000 Receiver - Operations Manual
28 / 45
©Metrotech Corporation 2006 – All Rights reserved
6.1.1.3 High
Frequency
High frequencies are those above 10kHz.
Use the 4-way navigation button to move up and down the frequency list. Use the 4-way
navigation button to move right to highlight the frequencies. Press the <Select> soft key to
activate or deactivate specific or all frequencies.
Deactivating frequencies does not permanently remove these from the
i5000
receiver. Access
the frequency menu to reactivate them.
Activated frequencies can be selected from the operational display screen by pressing the
<Freq> soft key. Selecting fewer frequencies allows faster toggling between frequencies from the
operational display screen.
Figure 6-5 High Frequency Selection Screen in Frequency Menu
6.1.1.4 Power
The Power menu allows switching between 50Hz and 100Hz passive locating modes.
Use the 4-way navigation button to move up and down the frequency list. Use the 4-way
navigation button to move right to highlight the frequencies. Press the <Select> soft key to
activate or deactivate specific or all frequencies.
Deactivating frequencies does not permanently remove these from the
i5000
receiver. Access
the frequency menu to reactivate them.
Activated frequencies can be selected from the operational display screen by pressing the
<Freq> soft key. Selecting fewer frequencies allows faster toggling between frequencies from the
operational display screen.
Figure 6-6 Power Frequency Selection Screen in Frequency Menu
