Vivax cool ACP-09PT25GN, Руководство пользователя

Страница: 124 / 153

- 13 -
A) TEMPORARY
1. Attach one end of the duct to the exhaust air outlet of the mobile air conditioner,
first fit the left side of the duct on the exhaust air panel, then the right side duct.
Push it downwards, be sure to fix thoroughly.(See the fig. 8 )
2. Attach the other end of the duct to adaptor B.
3. Put the end of duct to a nearby window.
Window Kit Installation
Your window kit has been designed to fit most standard “Vertical”, and “horizontal” window
application, however, it may be necessary for you to improvise/modify some aspects of the
installation procedures for certain types of window .
Please refer to Fig.11a&Fig. 11b for minimum and maximum window openings.
Drain Tank Safety Feature
This unit is equipped with an internal water tank, two full-safe switch mechanisms, one is used
to control the water pump drainage, the other is used to monitor the water level inside the
internal water tank. When the water level reaches a predetermined altitude, the digital display
shows “E5” and the water full indicator light illuminates. Cut off the power and move the unit
outside carefully, remove the rubber blockage from the back drainage hole and drain the water
off. The unit will continue to operate properly.
W i n d o w s i d e r k i t
m i n : 6 7 . 5 c m ( 2 . 2 2 f t )
m a x : 1 2 3 c m ( 4 . 0 4 f t )
W i n d o w s i d e r k i t
m i n : 6 7 . 5 c m ( 2 . 2 2 f t )
m a x : 1 2 3 c m ( 4 . 0 4 f t )
Fig.11b
Fig. 11a