7
O P T I C A L F M C R U I S E R
6
O P T I C A L F M C R U I S E R
Setting up your Cordless Mouse
After you have installed the receiver, you are ready to place the mouse on your
desktop. Because the mouse uses cordless radio technology, the exact position
of your mouse is not critical, giving you considerable freedom of movement
and a more enjoyable computing experience. For optimal performance, place the
receiver at least eight inches or 20 centimeters away from the mouse or other
electrical devices, such as the computer, the computer monitor, or external drive.
Changing the Security IDs
Your mouse comes with multi security IDs, which can let your receiver only
listen to one mouse. Do the following steps to change security IDs when you
get undesired interference, change the batteries or for first time installation.
Step 1:
Press the CONNECT button on the receiver.
Step 2:
Press the CONNECT button on the bottom of the mouse ONCE
and wait for 10 seconds. If the mouse cursor does not move after
10 seconds do the above steps again.
Caution:
If you have changed the security ID successfully, the LED on the
receiver will flash several times.
Using Your Cordless Mouse
How to Use the 360° Scroll Ball:
You can scroll in Windows
®
98 / 98 SE /
2000 / ME / XP (95 / NT 4.0 - PS2) using your Optical FM Cruiser. The
following paragraph tells you how to scroll. Your mouse has an 360° Scroll
Ball that functions both as a Scroll Bar Controller and as a button. You can
control the Windows
®
Scroll Bar Horizontally and Vertically by rolling the
Scroll Ball toward the direction you want directly. And simply click the
Scroll Ball as you would with a standard mouse button.
ID-CONNECT-Switch
ID-CONNECT-Switch
• To scroll:
You can roll the Scroll Ball toward
the direction you want directly.
• To use the Scroll Ball like a standard mouse button:
Click (press down) the ball.
Caution:
For saving the batty power, the Mouse will automatically suspend
after you stop operating the mouse for a period of time.
To wake up the mouse, please press the any one button on the mouse.
Switching to Track Ball Mode
You can switch the 360° Scroll Ball to be a Track Ball Mouse. And also you
can switch back to 360° Scroll Ball Mouse mode anytime.
How to Switch the 360° Scroll Ball Mode to Track Ball Mode:
For Switching the 360° Scroll Ball Mouse to be a handy
track ball, click the middle button (i.e. press down
the Scroll Ball) and holding the button, click the right
mouse button at the same time. Release both the
buttons simultaneously.
How to Switch the Track Ball Mode to 360° Scroll Ball Mode:
For switching back to 360° Scroll Ball Mouse from
handy track ball, click the middle button (i.e. press
down the Scroll Ball) and holding the button, click the left
mouse button at the same time. Release both the buttons
simultaneously.
Maintaining the 360° Scroll Ball Function:
To maintain the performance of the Scroll Ball, please clean
the Scroll Ball and the rollers in the Scroll Ball Cave if there
is any problem with scrolling.
Step 1:
Rotate and then lift the Holding Cover.
Step 2:
Clean the dirt, fiber and sweat on the surface of
Ball and Roller in the Scroll Ball Cave.
Step 3:
Put on the Holding Cover and then rotate to fix in position.
Holding
Cover
