5
O P T I C A L F M C R U I S E R
4
O P T I C A L F M C R U I S E R
Getting Ready
Please check the following contents of your Optical FM Cruiser:
1 x Cordless Mouse
1 x User’s Manual
1 x Driver Disk
1 x Receiver,
2 x AAA alkaline batteries
Installing the Batteries
Step 1:
Remove the battery compartment cover on the
bottom of the mouse by squeezing the cover in
from the tab to release it.
Step 2:
Insert the batteries as shown inside the battery
compartment.
Step 3:
Replace the cover.
Low Battery Indicator
The Low Battery Indicator on bottom of the mouse will flash/
glow if the battery is low. Replace the battery if the Low Battery
Indicator is on. It is recommended that you use alkaline batteries
when you change batteries to optimize performance. You may
use other battery types,
but do not mix them with alkaline.
Note that the low battery indicator is calibrated for alkaline
batteries only, and will not give an accurate indication of
battery life for batteries other than alkaline. When you are not using your
cordless mouse for long periods of time, remove the batteries and store them
in a dry place at normal room temperature.
N.B.:
Batteries can leak. If you are not going to use the RF Mouse for a longer
period you should therefore remove the batteries from the device beforehand.
Consider the environment:
Batteries and battery packs should not be
thrown away with domestic rubbish. As a consumer you are legally obliged
to return used batteries/battery packs. You can hand them in at your
nearest collection point or wherever batteries/battery packs of the kind
concerned are sold. We at Vivanco also take back batteries/battery packs
free of charge. If you wish to use this service, send your old batteries
marked "Used!" to the following address:
Vivanco GmbH, Ewige Weide 17, D-22926 Ahrensburg
These abbreviations are to be found on batteries/battery packs containing
harmful substances:
• Pb Battery contains lead
• Cd Battery contains cadmium
• Hg Battery contains mercury
Connecting the Receiver
The Cordless Mouse uses digital radio technology Communication between
the mouse and your computer is achieved with great reliability using radio
waves. The cordless mouse do not have bulky cables that can get in the way,
the mouse emits radio frequencies as a means of communicating which are
picked up by the receiver and passed on to your computer.
The receiver is connected to your computer via a cable. And it plugs into your
computer's USB port or mouse porten.
Caution:
For PS2 mouse port installation:
Before installing the receiver's cable, turn
off your computer. Plugging and unplugging cables to your computer's mouse
port while the computer is running can damage the mouse port or your
computer.
For USB port installation:
Windows
®
98 or higher is required for USB port
installation. Connect the mouse cable to the USB port of the computer. For
Windows
®
, you may be prompted to insert the Windows
®
software CD. Insert
this software CD into the computer's CD-ROM driver when asked to do so.
Then follow the on-screen instructions.
Low Battery
Indicator
USB Port
PS2 Mouse Port