Vivanco BTC 700, Руководство пользователя

Страница: 9 / 113

9
Figure 5: Fixing the Sun-visor Clip
2.3 Turn On/Off BTC 700
Turn on the BTC 700: Long press K1, you will hear 2 power-up tones, Blue LED gives 3
quick blinks then Blue LED gives 1 blink per 3 seconds; Red LED is off. This indicates the
BTC 700 is power on.
Turn off the BTC 700: Long press K1, you will hear 2 power-down tones, Red LED will
blink 3 times then all LEDs are off. This indicates the BTC 700 is power off.
2.4 Pairing/Connecting your BTC 700 with Bluetooth Equipment
2.4.1 Pairing your BTC 700 with Bluetooth handset
Before making and answering calls, you must pair your BTC 700 and phone. Pairing sets
up a unique relationship between your BTC 700 and your handset. The handset will
memorize the BTC 700’s unique ID (or passkey). This ensures that a unique and encrypted
wireless link between your BTC 700 and handset will be used during calls.
Detailed operation procedures are as follows:
1.
Place your BTC 700 close to your Bluetooth handset, and ensure your BTC 700 is
power off, your handset is power on
2. Press and hold K1 for at least 6 seconds until the Blue and Red LEDs alternate
continuously. You will hear 2 power-up tones and a pairing tone to indicate that the
BTC 700 has successfully entered the paring mode
3. Following your phone user guide to active Bluetooth device search on the phone
side, on your phone screen you will see a list of Bluetooth equipment found by the
phone at the end of the searching process.
4. Select this Bluetooth BTC 700 from the list (for Vivanco BTC 700, the sign is
‘BTC700’) and initiate pairing following handset’s on-screen prompts.
Sun-visor Clip
Sun visor