Arm Blood Pressure Monitor
H358
Instructions for Use
Please read and retain these instructions for future reference
v001: 04/09/20
5.3 Installing the battery
Note:
Insert the batteries as shown in the picture. If not, the device will not work.
When LOW BATTERY symbol
appears on the display, turn the unit off, and then replace all batteries
with new ones at the same time. Do not mix old and new batteries. It may shorten the battery life, or
cause the device to malfunction.
The measurement values continue to be stored in memory even after the batteries are replaced.
Remove the batteries if the device is not to be used for a long period of time (more than 3 months).
Otherwise, the batteries may leak and cause a malfunction.
Batteries are not provided; The ZK-B869 is powered by 4 AAA dry batteries (DC 6V). Do not use other
types of batteries.
This device does not support the battery charging function. Do not use the rechargeable battery to
charge in this device.
5.4 Using the Adapter with Micro-USB cable
Insert one end of the Micro-USB cable into the micro-USB port of the
device, while insert the other end of the Micro-USB cable into the AC
adapter plug for receiving DC 5V.
Plug the Adapter into an electrical outlet. To disconnect the Adapter,
unplug the Adapter from the electrical outlet first, and then remove the
Adapter with Micro-USB cable form the monitor.
Adapter and Micro-USB cable are not provided ; adapter (DC 5V/500mA)
and Micro-USB are required.
5.5 Preventive inspection
1.
Check the device before measuring. Check the function of each component, and maintain the good
performance of the device.
2.
The recommended inspection period is once a month or less.
3.
The device should be periodically tested for safety to ensure leakage current insulation, including
leakage current.
4.
Check if the appearance is intact, whether the cuff is intact, and whether the device can be turned on
normally.
