Arm Blood Pressure Monitor
H358
Instructions for Use
Please read and retain these instructions for future reference
v001: 04/09/20
28)
This device uses a 63Vdc/1A quick fuse, which will protect the device when the instantaneous current
exceeds 1A. At this point the device will not be able to continue working, please contact a qualified
technician.
(Adapter with Micro-USB cable (not provided) Usage)
1)
Do not use the Micro-USB cable and Adapter if the device or the cable is damaged. Turn off the power
and unplug the power plug immediately.
2)
Plug the Adapter with Micro-USB cable into the appropriate voltage outlet. Do not use in a multi-outlet
plug.
3)
Never plug in or unplug the device from the electric outlet with wet hands.
4)
Fully insert the power plug into the outlet.
5)
When disconnecting the power plug from the outlet, do not pull the power cord. Be sure to pull from the
power plug safely.
6)
Unplug the adapter when not in use.
7)
Disconnect the power plug before cleaning.
8)
AC adapter and Micro-USB cable are not provided; the users are required to buy the adapter (DC
5V/500mA) and Micro-USB cable which meet safety requirements of IEC 60601-1 and IEC 60601-1-11.
Use of an adapter or Micro-USB cable which does not meet the requirements may damage and/or may
be hazardous to the device and users.
(Battery (not provided) Usage)
1)
Do not insert the batteries with their polarities incorrectly aligned.
2)
Batteries are not supplied; batteries required need to meet safety standards. The ZK-B869 is powered by
4 AA dry batteries (DC 6V), other models are powered by 4 AAA dry batteries (DC 6V). Do not use other
types of batteries. Do not use new and used batteries together.
3)
This device does not support the battery charging function. Do not use the rechargeable battery to
charge in this device.
4)
Remove the batteries if the device will not be used for three months or more.
4. Before Taking a Measurement
To help ensure an accurate reading, follow these directions:
Avoid drinking stimulants such as coffee or alcohol, exercising, bathing and smoking for 1 hour before
taking a measurement. Rest for at least 10 minutes before taking the measurement. Before performing
another blood pressure measurement, please rest quiet for 3 minutes, and the rest time allows the
artery to return to the state between blood pressure measurements.
Stress raises blood pressure. Avoid taking measurements during stressful times.
Measurements should be taken in a quiet place.
Remove tight-fitting clothing from your arm.
Sit on a chair with your feet flat on the floor. Rest your arm on a table so that the arm cuff is at the same
level as your heart.
Remain still and do not talk during the measurement.
Keep a record of your blood pressure and pulse readings for your GP.
Left and right arm can be measured (usually the left arm), left and right arm blood pressure may be
different, so the recommended blood pressure values may also be different, it is recommended that you
always use the same arm to measure. If the measured values of the two arms vary widely, advise your
