manualshive.com logo in svg

Vivace MPEG2, Руководство пользователя

Поделиться
Скачать
Vivace MPEG2 Скачать руководство пользователя страница 15

Anywave Communication Technologies 

Vivace MPEG2 Encoder User Manual 

14 

 

 14 / 37 

Powered by 

 

5.6

 

SPLITTER (optional component on certain models) 

The Splitter is an MPTS Program De-multiplexer, and ASI/IP to IP router.   

The Splitter can take IP MPTS MPEG2-TS streams from the external Ethernet input, or 
ASI input.  The Splitter then de-multiplexes programs in a MPTS to individual SPTS 
MPEG2-TS streams.  These SPTS streams can be configured to be used as inputs for 
the encoder.  

The splitter also features a discover mode to identify what programs exist in an incoming 
stream and provide information on the stream construction and codecs. 

Operation 

The Splitter can be accessed from HTTP user interface by 

selecting the “Input Splitter” 

name on the top of the user interface. 

The Splitter has the following main controls 

 

 

Start : to turn on the Splitter Function

 

 

Stop : to stop the Splitter Function

 

 

Restart : to restart a Splitter channel 

 

 

Status : to open detail real time stream information on running splitter channels

 

 

Save Configuration : save the configuration of the Splitter settings.  This is best done 
when the splitter is not running.  If you change configuration of the Splitter while 
running, a dialog box will appear asking if you want to save these new settings. If yes, 
the splitter channels which have had configurations changed will be stopped and 
restarted at that time.

 

 

Defaults: If selected, the user will be prompted to set all channels to default settings, 
then these can be saved.  Default settings set all output IP/ports to loopback and 
incremented non-conflicting ports.

 

 

For each Channel, there are these parameters to configure

 

o

 

Input Interface : ASI or IP or Tuner. 

 

  For IP input,  multicast, unicast, and loopback address supported.  

Set IP to 0.0.0.0 for generic unicast input, and 127.0.0.1 for 
loopback input.  

 

0.0.0.0 will catch all unicast inputs with a matching port

. 

o

 

Discover => once an input port is defined, you can select the Discover button.

  

After a few seconds, a Table will appear in the “Output” section that lists 
all the incoming programs on the input port.  For each program, PIDs, 
stream type, and codec is displayed. 

o

 

NOTE:

 DISCOVER will not function if the splitter is already running.  You 

must stop the channel to run discover. 

Содержание MPEG2







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды