IMPORTANT: Do NOT Return Dispenser To Store.
If you have a question or problem, please contact 1-844-469-8482 for
assistance
Model # 7LIECH-SC-SSF:Page 11
PROPER CARE & DESCALING
General Cleaning
Perform: As needed
Time Required: 5 minutes.
Note: Do NOT use abrasive materials or chemical cleaners.
They may scratch surfaces and contaminate drinking water. For cleaning hard spots suggest
rubbing with toothpaste.
1. Clean the cabinet surfaces using a soft cloth and warm soapy water, then rinse.
2. Wipe dust at the back of dispenser to improve efficiency.
3. Remove the drip tray assembly by pulling it forward. Remove the cover. Place the tray and cover
in the dishwasher or wipe the parts clean using a soft cloth and warm soapy water.
4. Reattach drip tray assembly.
Cleaning Cold Reservoir and Water Lines
Perform: Every 3 months or whenever an off-taste occurs.
Time Required: 15 minutes.
Note: Best to do prior to loading a fresh bottle.
1. Turn energy saving switch OFF.
2. Unplug the power cord from the wall outlet.
3. Remove the water bottle.
4. Unclip Wall Mount Strap from back of dispenser and turn
dispenser around so backside is facing away from the wall.
5. Place a 2 gallon or larger bucket under the drain plug in the
rear of the dispenser.
Remove the drain cap and the silicon plug. Cold water will
immediately flow into the bucket. After several seconds,
hot water will be dispensed.
Reminder - Place the drain cap screw and in a safe
location so that they will not be lost.
Excessive Weight Hazard
Use two or more people to move and install the
water cooler and the bottles.
Failure to do so can result in back or other injury.
WARNING
