Vitus Audio RI-100 Скачать руководство пользователя страница 26

26

RI-100 

| v 06.09.2011

5. warranty

Warranty

Warranty Statement 

(modified to fit Vitus Audio)

1. TERMS AND CONDITIONS

LIMITED WARRANTY

Vitus Audio warrants the 

product designated herein 

to be free of manufacturing 

defects in material and 

workmanship, subject to the 

conditions hereinafter set 

forth, for a period of three 

(3) years from the date of 

purchase by the original 

purchaser or no later than 

five (5) years from the date of 

shipment to the authorized 

Vitus Audio cooperating 

partner, whichever comes first, 

excepting

any cosmetic damage to 

chassis parts. (See 6)

2. CONDITIONS

This Warranty is subject to 

the following conditions and 

limitations. The Warranty 

is void and inapplicable 

if the product has been 

used or handled other than 

in accordance with the 

instructions in the owner’s 

manual, abused, or misused, 

damaged by accident 

or neglect or in being 

transported, or the defect 

is due to the product being 

repaired or tampered with by 

anyone other than Vitus Audio 

or authorized Vitus Audio 

repair center. The product 

must be packed in its original 

box and returned to Vitus 

Audio or an authorized repair 

center by the customer at his 

or her sole expense. Vitus 

Audio will pay return freight of 

its choice.

IMPORTANT!

A returned product MUST 

be accompanied by a written 

description of the defect 

and a photocopy of the 

original purchase receipt. 

This receipt must clearly list 

model and serial number, 

date of purchase, the name 

and address of the purchaser 

and authorized dealer and the 

price paid by the purchaser. 

Vitus Audio reserves the right 

to modify the design of any 

product without obligation 

to purchasers of previously 

manufactured products 

and to change the prices or 

specifications of any product 

without notice or obligation to 

any person.

3. REMEDY

In the event the above 

product fails to meet the 

above Warranty and the above 

conditions have been met, the 

purchaser’s sole remedy under 

this Limited Warranty shall be 

to return the product to Vitus 

Audio or an authorized Vitus 

Audio repair center where the 

defect will be rectified without 

charge for parts and labor, 

except chassis parts. (See 6)

4. LIMITED TO ORIGINAL 

PURCHASER

This Warranty is for the 

sole benefit of the original 

purchaser of the covered 

product and shall not be 

transferred to a subsequent 

purchaser of the product.

5. DURATION OF WARRANTY

This Warranty expires on the 

third (3rd) year anniversary 

of the date of purchase or 

no later than the fifth (5th) 

anniversary of the date of 

shipment to the authorized 

Vitus Audio cooperating 

Содержание RI-100

















































Отзывы: