Vitus Audio RI-100, Руководство пользователя

Страница: 20 / 48

20 RI-100 | v 06.09.2011
3. operation
Discription of the
e l e m e n t s i n t h e
m e n u .
OUTPUT
Change between speaker and
headphone output.
SETUP
Change the settings of the RI-100.
DATA
Shows information about this
RI-100.
RESET
Restore the settings of the RI-100
to its default settings.
REMOTE
Change the settings of the Apple
Remote.
REMOTE ID
Show the ID of the remote.
NO PAIR
Un-pair the remote and the RI-100
by removing the REMOTE ID
V.INIT
Change the initial dB step of the
volume in the RI-100 to any step
between -99 and12.dB
VOL.STEP
The RI-100 has a standard volume
step of -42 dB. You can set the
volume step to a step, between
-99.0 dB to +6dB.This step will be
the new volume step. Even when
after the power cord has been
disconnected the RI-100 still starts
up in the new volume step.
REMEMBER
Set the RI-100 to remember the
current volume step. The RI-100
will start up in this volume step
when it leaves standby. This
volume step however is not
remembered when the power
cord is removed. Then the RI-100
will initiate in the volume step as it
is defined in the V.INIT sub-menu.
BRIGHT
Change the brightness of the
display any step between 0 and 3.
INPUTS
Change settings for each input.
INPUT X
Change the settings of input X.
USED
Select whether input X has to be
USED or not NOT USED.When
you select NOT USED input X will
not be shown in the list of inputs.
TEXT
Choose a name for input X.
OFFSET
Select an offset- gain, between
-12 and 12 dB, for input X.
SET FIX
Set the volume of input X to a
fixed dB step. (Input X is now
locked to a dB step and can not
be adjusted with the volume
control)
FIXED
Lock and unlock the volume by
switching between FIX ON/FIX
OFF.
ADJUST
Adjust the fixed dB step to any
step between -99 and +12 dB