Vitus Audio MP-D201, Руководство пользователя, Страница: 20 / 80

20 MP-D201 | Version 1
3. operation
SETUP
Change the settings of the MP-
D201
OUTPUT
Change between XLR out or RCA
out .
DAC VOL
Turn the volume control of the
MP-D201 on and off .
DATA
Shows information about this
MP-D201 .
HW vx.xx
Hardware version
SW vx.xx
Software version
xx-20xx
Last updated
RESET
Restore the settings of the
MP-D201 to its default settings .
V.INIT
Change the initial dB step of the
volume in the MP-D201 to any
step between -99 and12 .dB
VOL.STEP
The MP-D201 has a standard
volume step of -40 dB . You can
set the volume step to a step,
between -99 dB to 0 dB . This step
will be the new volume step . Even
when after the power cord has
been disconnected the MP-D201
still starts up in the new volume
step .
REMEMBER
Set the MP-D201 to remember
the current volume step . The MP-
D201 will start up in this volume
step when it leaves standby .
This volume step however is not
remembered when the power
cord is removed . Then the MP-
D201 will initiate in the volume
step as it is defined in the V .INIT
sub-menu .
BRIGHT
Change the brightness of the
display any step between 0 and 3 .
INPUTS
Change settings for each input .
INPUT X
Change the settings of input X .
TEXT
Choose a name for input X .
OFFSET
Select an offset- gain, between
-12 and 12 dB, for input X .
SET FIX
Set the volume of input X to a
fixed dB step . (Input X is now
locked to a dB step and can not
be adjusted with the volume
control)
FIXED
Lock and unlock the volume by
switching between FIX ON/FIX
OFF .
ADJUST
Adjust the fixed dB step to any
step between -99 and +12 dB
MP-D201 Menu: discription of the elements.