VITRA Tyde 2, Инструкция по эксплуатации

Страница: 5 / 15

EN
16
max.
25 kg
55 lbs
max.
25 kg
55 lbs
Overvoltage
To avoid the risk of injury caused by mains-related
overvoltage:
ƒ Keep the power supply switched o ff during installation and
maintenance work.
ƒ Switch o ff the power supply if the unit begins to emit smoke, odours or
unusual noises.
ƒ Switch o ff the power supply in case of storms and before leaving the
unit unattended for extended periods.
ƒDo not pour any liquid/splash water into or onto the plug connections.
ƒDo not operate the unit if the power cable is damaged. Ensure
damaged power cables are replaced by Vitra Service or by a qualified
electrician.
ƒObserve Vitra general electrification notice. 710 254 24.
DANGER! !
Procedure in the event of malfunction
CAUTION! !
In case of malfunctions, e.g. emission of smoke or
odours, unusual noises, other faults or operational failures, switch o ff the
power supply immediately and contact your Vitra retail partner.
To avoid the risk of injury caused by overheating:
ƒafter the table has been switched on for a maximum of 2 minutes, do not
activate it again for at least 18 minutes.
ƒImmediately give the table a break of at least 18 minutes when there is a
reduction in speed, as this indicates that the table is beginning to overheat.
Overheating
CAUTION! !
Overloading
The table columns will
work best when the load on the table is
distributed evenly:
ƒ max. 2 x 25 kg at the edges
ƒ max. 50 kg total area evenly distributed on
the tabletop
ATTENTION! !
The noise emission during use is
max. 50 dB(A).
Noise emission
Movement range
65 - 125 cm