Operational steps:
1. User selects ‘
Camera
’ through main menu.
2. Pressing ‘
Enter
’ key and entering video channel setup menu. User can shift cursor
through ‘
Up
’ and ‘
Down
’ and configure each option through “
Left
” and “
Right
”. The
menu is shown in the following figure:
Figure 39 Video Channel Connections Setup
3. Channel no: select the channel to be controlled. Default as:
01.
4. Connect: whether to display current channel or not. Default as:
On
.
5. Mask Area: setup the area to be sheltered in current channel.
6. Mask Active: whether to activate the sheltered area in current channel or not. Default is:
Off
.
7. Rec. Reserve: Recording reserved when overwrite. When the disk is full, records of
current channel are not deleted for period of days set.
8. Channel name: display current channel name.
9.
If all of the channels have the same video channel parameters, after setup of
one channel,
press “
All
” below, system will display “
All setting is applied
to all Channel
”, then
press “
Enter
” and all Channels will set these parameters automatically.
10. Press ”
OK
” to activate new configurations; Press
“Cancel
” to cancel changes.
Detailed operation steps shelter area setup is shown as follows:
After user enters video area setup, menu will appear
