VITO VIAC4, Инструкция по эксплуатации

Страница: 27 / 40

Question/Problem - Cause
Cause
Solution
The vacuum cleaner does not start:
•
No supply voltage;
•
Faulty ON/OFF switch;
•
Faulty electric motor;
•
Check the power cord, plug and socket;
•
Call brand’s technical assistance;
•
Call brand’s technical assistance;
The motor makes an abnormal sound, starts
intermittently or runs slowly:
•
ON/OFF switch electrical contacts are damaged;
•
Mechanical parts are blocked;
•
Repair or replace the switch;
•
Inspect the mechanical parts;
Low suction power:
•
HEPA filter is completely dirty;
•
Clean the filter according to the maintenance
instructions;
The warranty for this product is in accordance with the law
in force from the date of purchase. You should, therefore,
keep your proof of purchase during this period. The
warranty covers any manufacturing defect in material or
operation, as well as parts and work needed for their
repairing.
Excluded from the warranty are the misuse of the product,
any repairs carried out by unauthorized individuals (outside
the service center of the brand VITO) as well as any damage
caused by its use.
We declare, under our sole responsibility, that the product
labelled
4L 800W ASH VACUUM CLEANER with code VIAC4
complies with the following standards or normative
documents
: EN 62233:2008, EN 60335-
1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019+
A15:2021, EN 60335-2-2:2010+A11:2012+A1:2013, AfPS GS
2019:01 PAK, EK1 498-11:2011, EN 55014-1:2017+A11:2020,
EN 55014-2:2015, EN IEC 61000-3-2:2019, EN 61000-3-
3:2013+A1:2019,
as defined by :
2006/42/EC – Machinery Directive
2014/35/EU – Low Voltage Directive
2014/30/EU - Electromagnetic Compatibility Directive
S. João de Ver,
06 th july 2022
Central Lobão S. A.
Technical supervisor
Hugo Santos