VITO PRO-POWER VITIC570, Инструкция по эксплуатации

Страница: 25 / 42

25
Do not expose the power tool to rain or use it in wet or
moist environments. The presence of water in a power
tool increases the risk of damage and electric shock to
the user.
Only hold the power tool by its insulated surfaces,
which prevent electric shock if the power tool comes
into contact with hidden wires or power cord during its
use.
Do not use power tools in explosive
environments, such as in the presence of
flammable liquids, gases or dust. Power tools create
sparks that can ignite liquids, gases, or dust.
Before you start working
Individuals who have not read the instruction manual
must not operate the jigsaw.
To ensure that you work with the power tool safely, you
should take into account a few precautions and
procedures before start-up:
▪
Inspect the power tool before each use. Check that
the blades are installed correctly and in good
condition. In case there is excessive damage or wear,
replace them;
▪
Check that all fixing screws are properly screwed.
Regular inspection is important to ensure the safety
and performance of the power tool;
▪
Check the condition of the blades. Never use bent,
cracked or damaged blades;
▪
After the blades’ assembly and before using the
power tool, test it at full speed with no load for a
while. Check for existing misalignment on the saw
blade or any other condition that may affect the
power tool operation. Check that all moving parts
rotate smoothly, without abnormal noises;
▪
Check that the safety devices are in perfect condition
and work properly. Never use the power tool if the
safety devices are missing, inhibited, damaged or
worn out;
▪
If the ON/OFF switch is damaged or does not allow
the operation of the tool to be controlled, it must be
repaired or replaced in order to prevent any
unintentional start;
Make all adjustments and work necessary for the
correct assembly of the power tool if you have any
questions or difficulties, contact your official dealer.
While operating
Keep third parties away from the power tool's area
of operation. Never work while animals or people,
especially children, are in the danger zone.
Keep the work area clean, organized and well lit (250 to
300 lux light), thus decreasing the risk of accidents.
Always wear personal protective equipment and
clothing. Wearing a visor or goggles, dust mask, hearing
protection, anti-slip safety shoes, long-sleeved clothing,
gloves and helmet properly reduces the risk of injury.
Clothing worn during the machine operation must be
adequate, tight and closed, for example, a work boiler
suit. Do not wear loose clothing or jewelry. Keep hair,
clothing and gloves away from moving parts.
The use of the power tool causes high load of
vibrations which can cause damage to the
circulatory and nervous systems, especially in people
with circulatory problems. Seek medical attention if
symptoms occur that may be caused by vibrations.
These symptoms, which occur mainly in the fingers,
hands or wrists, include, for example, loss of sensation,
pain, muscle weakness, discoloration of the skin or
unpleasant tingling.
When operating the appliance, plan pauses and avoid
operating the machine for long periods of time.
Permanent vibrations are harmful to health.