VITO PRO-POWER VIMSF100, Инструкция по эксплуатации

Страница: 28 / 48

28
While operating
Keep third parties away from the power tool's
area of operation. Never work while animals or
people, especially children, are in the danger zone.
Keep the work area clean, organized and well lit, thus
decreasing the risk of accidents.
To avoid all dangers associated with welding work,
always wear personal protective clothing and
equipment. Wearing an approved hand-held welding
mask with suitable protective lenses or approved side-
shield goggles, long-sleeved clothing, safety shoes,
gloves and leather apron, mask and ear plugs under the
appropriate conditions reduces the risk of injury.
When welding, or monitoring the welding process,
always wear a hand-held welding mask. Do not look
directly at the welding arc, use a welding mask with a
suitable protective screen. Never weld without a mask.
Do not wear contact lenses during the welding process.
When you weld for a long time in the same place, use a
fume extraction equipment suitable for gases and
vapours resulting from the welding process. Use
respiratory protection equipment if there is a hazard of
inhaling vapours resulting from welding work.
In enclosed spaces, air-conditioned environments and
in areas of high electrical risk, use only devices with the
symbol . Appliances with this safety symbol are
suitable for welding in areas with greater danger of
electric shock.
To avoid the risk of overheating the power tool, keep
the ventilation slots permanently clean and unclogged
to allow air flow, avoid exposure to the sun and do not
cover the power tool during use.
Avoid using the welding machine on surfaces coated
with paints containing lead or other materials harmful
to health. Any contact or inhalation of dust may cause
allergic reactions and / or breathing disorders.
During welding, always be aware of sparks that may
cause a fire. Always have a fire extinguisher ready and
nearby for immediate use.
When using the power tool, you should take into
account that:
▪
Welding machines produce high voltage. Do not
touch the wire, welding gun or work piece while the
wire welding machine is on. Electric shocks can kill;
▪
Before each use, you should check the insulation of
the power cord, work cables and attached
accessories in order to avoid electric shocks;
▪
Fumes and welding gases can harm you. To avoid
these dangers, the user must ensure enough
ventilation or exhaustion to keep fumes and gases
away from the breathing area;
▪
The UV rays of the welding arcs produce intense
visible and invisible radiation that can burn the eyes
and skin;
▪
Loud noises impair hearing. Use ear plugs if the noise
level is loud;
▪
During welding, sparks and molten metal particles
can be ejected and cause serious injury;
▪
Welding generates high heat. Hot surfaces and
materials in the work area can cause severe burns.
Wear gloves and use pliers when touching or moving
materials;
Maintenance and cleaning
Before performing cleaning, adjusting, accessories
changing, repairing and maintenance work, the power
cord must be unplugged from the socket.
Replace worn out or damaged parts immediately, so
that the power tool is always in a safe operating
condition.
Cleaning:
The power tool must be carefully cleaned after each
use.
The power tool must be carefully cleaned after each
use. These products may damage plastics and metals,
compromising the safe operation of the power tool.