VITO PRO-POWER VIBCSSSFL20, Инструкция по эксплуатации

Страница: 29 / 40

29
FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING
Question/Problem - Cause
Causa
Solution
The reciprocating saw doesn’t switch on when you
press the” on/off” switch :
•
Discharged battery;
•
Switch connections are not in good condition or
switch does not work;
•
Charge the battery;
•
Repair or replace the switch;
The” on/off” switch is blocked:
•
The “ON/OFF” switch lock/unlock button is not
pressed;
•
Press the lock/unlock button of the “ON/OFF”
switch;
Poor quality of cut:
•
The blade is not sharpened;
•
The blade is not properly assembled;
•
The pressure on the saw is too high;
•
Sharpen the blade properly;
•
Assemble the blade properly;
•
Reduce the pressure on the reciprocating saw;
Low performance of cut:
•
The blade is not sharpened;
•
The cutting speed is not in accordance with the
type of material of the workpiece;
•
The pendulum movement is not in accordance
with the type of material of the workpiece;
•
Replace by a new blade;
•
Adjust the speed according to the type of material;
•
Adjust the pendulum movement according to the
material;