VITO PRO-POWER SDS-MAX, Инструкция по эксплуатации, Страница: 17 / 28

EN
17
before unplugging. Do not use
this tool to mix or pump easily
combustible or explosive fuids
(benzene, alcohol, etc). Do not
mix or stir infammable liquids
labeled accordingly.
LUBRICATIOn
Your power tool requires no
additional lubrication. Always
apply a small amount of grease
to the shank of the SDS-MAX bit
before inserting it into the tool bit
holder.
TOOL CLEAnInG
Unplug the tool before you use a
cloth to clean the housing. With
the motor running, blow dirt and
dust out of all air vents with dry
air regularly. Wear safety glasses
when performing this. Exterior
plastic parts may be cleaned with
a damp highly solvent resistant,
NEVER use solvents.
STORAGE
Store your drill in its kit box or
with a bit inserted to prevent dirt
getting into it.
IMPORTAnT: To ensure
product SAFETY and
RELIABILITY, repairs,
maintenance and adjustment
(other than those listed in this
manual) should be performed
by authorized service centers
or other qualifed organizations,
always using identical
replacement parts. Unit contains
no user service able parts inside.
CAUTIOn: The use of any non-
recommended accessories may
be hazardous.
PROTECTInG THE
EnVIROnMEnT
Should you fnd one day that your
tool needs replacement, or if it is
of on further use to you, think of
the protection of the environment
pleas recommends you to contact
your local council for disposal
information.
DECLARATIOn OF
COnFORMITY
15
We declare under our exclusive
responsibility, that the product
Rotary Hammer 1050W, with
the code VIMP1050P, meets
the following standards or
standardization documents:
EN 60745-1, EN 60745-2-6,
EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3 and
ZEK01.4-08/11.11, according to the
determinations of the directives:
2014/35/CE - Machinery Directive;
2006/95/CE - Low Voltage
Directive;
2014/30/EC - Electromagnetic
Compatibility;
2000/14/EC - Sound power level
guaranteed: LwA: 105 dB(A)
- Sound power level mesured: LpA
96 dB(A).
S. João de Ver,
June 5th of 2015.
Central Lobão S. A.
Responsible for the Technical File
WARRAnTY TERMS
The warranty of this compressor
is two years from the date of
purchase. You should, therefore,
keep your proof of purchase during
this period of time. The warranty
covers any manufacturing defect
in material or operating, as well
as parts and work needed for
their recovery.Excluded from
the warranty the misuse of the
product, any repairs carried out by
unauthorized persons (outside the
service center of the brand VITO),
as well as any damage caused by the
use of it.