Vito Agro VIRL7A, Инструкция по эксплуатации

Страница: 28 / 48

28
Long-term storage
Allow the electric motor to cool down before storing the
log splitter in a closed compartment.
Store the log splitter in a dry, well closed and ventilated
compartment.
Clean the log splitter thoroughly before storage,
particularly during the winter period. Store the log
splitter in an operational and good mechanical
condition.
Make sure that the log splitter is protected against any
misuse (e.g. by children).
Technical assistance
Your log splitter should only be serviced by the
manufacturer's internal service personnel, or other
qualified personnel, replacing any necessary parts with
original parts sourced directly from the manufacturer.
ASSEMBLY INSTRUCTIONS
Metal stand
1. Remove the wheels from the log splitter;
2. Mount the lower (1) and upper (2) bars on the front
support leg (16), by fastening two hexagon screws,
two spring washers, two flat washers and two nuts
on each bar;
3. Mount the rear support leg (5) into the wheel’s
holder (4) by fastening four hexagon screws, four
spring washers, four flat washers and four nuts;
4. Attach the wheels holder to the lower bar and the
rear support leg to the upper bar;
5. Secure the wheels to the wheel holder, as shown in
the photo;
1.
2.
3.
4. 5.