Vitl Lu-Mini, Инструкция по эксплуатации

Страница: 16 / 85

Instructions for Use
16
5 Lu-mini Unit Installation
Before installing the Lu-mini unit, please check that the delivery is complete
(see Table 3) and that the unit and all accessory parts are intact and free
from any signs of transportation damage. Also ensure that all external and
internal packaging has been removed from the unit before installation.
Please retain all packaging for future transportation and storage of
the unit and its accessories.
The Lu-mini unit should be installed in a location which meets the following
requirements:
•
Safe and suitable operating environment (see Section 2)
•
Solid, stable, vibration-free and level working surface
•
At least 10cm clearance around the unit to adjacent objects and walls
•
Out of direct sunlight and away from sources of heat or draught
WARNING
Please also observe and abide by the Unit Installation and
Operating Environment safety precautions and preconditions
listed in Section 2 of this manual.
When the unit is initially installed, the real-time clock will need to set to your
local time and date. Please read Section 6 first, and then refer to Section
6.7.1 for details.
NOTE
When the unit is initially powered, or if the unit has been in storage
or left unpowered for several months, the internal real-time clock
battery will need recharging.
The unit may report an
E85
warning (see Section 8).
Please leave the unit powered for at least 2 hours (preferably 8
hours) to recharge the battery.
Please refer to Section 7.1 for details on installing the associated
Lu-mini Windows App.