12
Starting:
Remove the blade protector before using the hedge trimmer.
Press the switch (9) on the rear handle and the front handle switch (5), you can
then start work.
Stop:
Release the front handle switch (5) or the switch (9) on the rear handle, you can
stop it.
Working With the Hedge Trimmer
Hold the hedge trimmer with both hands and keep it a safe distance away from your
body. Ensure that you always maintain a stable position. It is possible to cut
branches up to a maximum thickness of 28 mm. In order to approach branches with
the blades, move the hedge trimmer forwards straight along the line of the cut. Cut
the sides of the hedge first, then the top. In order to obtain a perfect shape, we
recommend you cut upwards in the direction of the growth. If you cut from top to
bottom, the thinner branches will move outwards leaving holes or less bushy
places.
In order to cut the top in a straight line, stretch a wire along the entire length of the
hedge at the desired height.
Take care not to cut foreign objects such as metal wires, latticework which would be
likely to damage the blades or the drive.
If the blades are jammed or blocked by an obstacle, switch off the appliance
immediately and remove the battery, and only then can you intervene to free the
appliance.
Rotary Handle Use
- To facilitate the use of hedge trimmers in vertical sections, the rear handle is
adjustable to the right and left.
- Handle position should be adjusted only when appliance is off.
- Press the handle rotation knob (7) down to unlock the handle and rotate to the
right or left to tilt chosen.
NOTE: The switch should not be actuated when rotate the rear handle.
