4. First insert the left hand side (marked L) of the rotating basket into the cooking space (10).
To do this, insert the left end (with just one notch) of the shaft as far as it will go into the round
holder (11) on the left hand side of the cooking space. Then hang the other end (with two
notches) of the shaft into the support on the right hand side of the cooking space.
5. Check that it fits securely. The rotating basket must not be able to rotate about its own axis
when the Air Fryer is switched off. If this is the case, insert the left hand end of the shaft
deeper into the holder. After use, remove the hot rotating basket from the cooking space
using the removal tool (see the Removal Tool section). Always use oven gloves to open and
empty the rotating basket.
Removal Tool
The hot rotating basket or rotating spit is taken out of the cooking space using the removal
tool (5).
1. Place the ends of the removal tool under the shaft as shown in below diagram.
2. First lift up the right hand side of the shaft and move it forwards a little until the left end of
the shaft is released from the holder.
3. Carefully lift the rotating basket or rotating spit out of the cooking space (10) and place
down on a heat resistant surface.
Before Initial Use
1. The Air Fryer should be used for the first time without any food in it as it may produce some
smoke or odours due to coating residues. Allow the device to heat up on the highest
temperature setting for approx. 15 minutes without any food in it.
2. Clean all accessories in warm soapy water and dry thoroughly.
9
