CLEANING/ MAINTENANCE INSTRUCTIONS:
During Season Care:
●
Before cleaning, be sure to turn off and unplug the heater.
●
Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor and
heating elements.
●
Do not immerse the heater in water.
●
Never use gasoline, benzene or thinner. This will damage the surface of the heater.
●
After cleaning, be sure to completely dry the unit with a cloth or towel.
After Season Care:
●
Store heater in a cool and dry location with power cord properly secured.
●
Please store the unit in its original carton or suitable container.
PRE—OPERATING INSTRUCTIONS:
Carefully remove your heater from the box (please save the carton for off-season storage)
Assemble the Iron tube and basement as following steps:
（
Step1
）
Aiming the assemble poles with the corresponding holes, and insert the poles into the
holes.screw tightly into the screw holes of the base.
(Step 2
）
Insert the Iron tube into the hole on the basement tightly.
STEP 1
STEP 2
（
Step 3) Using the screw stem to screw the Iron tube at the bottom tightly.
（
Step 4
）
Position the vein on the body in the flute of the Iron tube, Insert the Iron tube into the unit
body.
STEP 3
STEP 4
（
Step 5
）
Aiming the body assemble holes with the corresponding holes on the Iron tube.
（
Step 6
）
Screw tightly into the aimed holes.
STEP 5
STEP 6
Make sure the unit is in the OFF position before plugging the heater into the outlet.
Place heater on a firm level surface.
Screws
Base
Iron Tube
Hole on the base
screw stem
Flute
Unit body
Vein on the body
Iron Tube
Assemble holes
on the body
Screws
