Vitek Industrial Video Products, Inc.
28492 Constellation Road
Valencia, CA 91355
Phone: 661-294-8043
Fax: 661-294-8044
e-mail: [email protected]
4
of
5
Vitek Industrial Products, Inc. Specifications
March 2012
with single step move function.
(12) The default movement speed shall be selectable between slow, medium and fast.
(13) The camera shall have a customizable panning range to limit the pan movement.
(14) The camera shall be equipped with a built-in calibration feature.
(15) The calibration feature shall automatically track the point of origin and correct position
errors.
F. Communication
(1) The camera shall have built-in RS-485 and RS-422 port.
(2) The camera shall communicate in selectable speeds of two thousand four hundred (2400)
baud per second (bps) to two hundred thirty thousand (230,000) baud per second (bps).
(3) The default communication speed of the camera shall be nine thousand six hundred
(9600) baud per second (bps).
(4) The camera shall automatically detect major communication protocols.
(5) The camera shall have up to nine hundred ninety-nine (999) physical addresses and up to
three thousand nine hundred ninety-nine (3999) programmable logical addresses.
G. Environmental
(1) The operating temperature shall be between fourteen (14) degrees to one hundred twenty
two (122) degrees in Fahrenheit with optional outdoor housing.
(2) The operating temperature shall be between negative twenty two (22) degrees to one
hundred twenty two (122) degrees in Fahrenheit with optional outdoor housing and
Outdoor Kit.
(3) The operating temperature shall be between negative sixty (-60) degrees to one hundred
twenty-two (122) degrees in Fahrenheit with optional outdoor housing and extreme cold
outdoor kit.
(4) The storage temperature shall be between four (4) degrees and one hundred forty (140)
degrees in Fahrenheit.
(5) The operating humidity of the camera shall be zero (0) to ninety (90) percent
non-condensing.
H. Electrical
(1) The power consumption shall be up to three amperes.
(2) The operating voltage shall be twenty-four (24) volts alternating current (AC) or direct
current (DC).
I. Dimensions
and
weight.
(1) The dimensions shall be four-point-nine-six (4.96) inches in diameter and
seven-point-one-three (7.13) in height.
(2) The weight shall be approximately two-point-nine-five (2.95) pounds (lbs).
J. Optional
Accessories
(1)
Flush
Mount
Kit
VT-PTFMK
(2)
Outdoor
Housing
VT-PTHSG
(3)
Outdoor
Kit
VT-POTDKIT
(4) Extreme Cold Outdoor Kit
VT-POTDKITE
(5)
I-Beam
Mount
VT-PTIBMT
